This volt meter has been designed to allow you an easy way to monitor the battery's charge condition by digital read out.

This volt meter is designed with a colour graph around the outer edge of the meter. The colour graph makes it easier to monitor the condition of the Lithium battery.

Usually monitoring Lithium batteries with a volt meter is very difficult, as a small change is a larger change in the battery capacity of a lithium. See estimated voltages below for a lithium battery reading:

13.4 Volt = 100%	13.2 Volt = 70%
13.0 Volt = 30%	12.0 Volt = 10%

The Colour graph around the outer rim of the gauge is designed to stay illuminated GREEN when the lithium battery capacity is above 50%.

The graph will then illuminate ORANGE from approx 50% - 30% of battery capacity.

The push button allows for the volt meter to switch ON / OFF when desired. Once pushed, the button will 'hold in' until pressed again to release and turn off the gauge.

The volt meter is pre-wired to 3mt of 2mm twin core cable.

* It is advised to install an in line fuse in any line that feeds off a battery connection (recommended 3-5 Amp fuse)

Item specifications:

Part No.	CBV-L
Voltage	9 - 33 Volts
Dimensions:	L 109mm x H 55mm W 30mm (35mm incl push button)
Cable Gauge	2mm automotive twin core
Cable length	3mt
Approx Power usage	3-4ma
Warranty	12 months